ANSI/BHMA A156.2-2017
for Bored & Preassembled Locks and Latches
Standard ANSI/BHMA A156.2-2017 establishes requirements for bored and preassembled locks and latches, and includes cycle tests, strength tests, operational tests, material evaluation tests, finish tests, and dimensional criteria. For further information, consult the full standard, ANSI/BHMA A156.2 for Bored & Preassembled Locks and Latches.
|
|
|
|
|
|
Product Performance: Purchasers of bored locks certified to A156.2 (http://buildershardware.com/cpd) can be assured products will perform to their expectations.
Below are an explanation and some examples of the evaluations conducted for certification:
|
OPERATION |
DURABILITY |
SAFETY & SECURITY |
APPEARANCE |
|
Attributes such as the force to retract the latch and force to close the door are measured to ensure ease of egress and smooth closing. The forces to open the door vary by the type of trim. For example: lever operated locks must open with a maximum torque of 28 in-lbf. |
Building products are expected to last a long time, and builders hardware is no exception. Grade 1 locks, for example, must pass a rigorous test through one million cycles of opening and closing with a 10 pound axial load applied. |
Locksets are counted on to allow carefree operation to those who are authorized, and ensure a high degree of security from the outside. Seven aggressive tests are specified, including a 1,200 in-lbf locked lever torque and two directions of impact. |
An additional duty of builders hardware is to be aesthetically attractive and stay that way. Resistance to corrosion, chemicals, abrasion, and sunlight are all considered in an array of finish tests, providing confidence in the architectural metals and coatings. |
|
Building Codes |
Builders hardware provides several attributes that are essential to building safety and performance, including egress and fire protection. BHMA locksets are designed to comply with all applicable requirements. For example, hardware for fire doors is evaluated and listed to UL 10C by an accredited third-party testing laboratory. |
|
|
Accessibility |
There are various types of trim which meet the ADA and A117.1 requirements for operable parts to be “operable with one hand and shall not require tight grasping, pinching or twisting of the wrist.” Lever or paddle type trim meets these stipulations, while knob trim should be avoided for accessible routes. In addition, BHMA certified hardware must comply with the operational forces in their respective standards, which have been shown to be suitable for accessible applications. |
|
|
Sustainability |
Locks and latches contribute to building sustainability through their verified durability, as well as material characteristics such as recycled content and recyclability. The reliable closing and sealing of openings can also contribute to energy conservation. BHMA has developed Product Category Rules, which will further define sustainability requirements and guide life cycle assessments and environmental performance declarations. |
|
|
Function Numbers: Another significant contribution of standards for product specification is a numbering system for lock function. Please consult A156.2 for the full list; an example is provided here:
F80 Grades 1 and 2: Communicating Lock. Dead locking latch bolt operated by lever from either side. Turning key in either lever locks or unlocks its own lever independently. Do not use on doors in rooms that have no other entrance. |
|
|
|
|
|
|
To purchase a copy of any BHMA Standard, go to www.buildershardware.com or call 800-699-9277.
This document is not a substitute for the full standard. Refer to the entire standard for full information.
Foshan Keroyal Security Technology Company Limited
Contact：Alex Liao
Tel：+86-13310892221
Email：Alex13310892221@live.com
Add：Room 3334, Building 5, Golden field, No. 1, Foping 3 road, Nanhai district, Foshan city, Guangdong province, China;528200
Alex Liao